Operation
RAPT Can & Bottle Filler | Operation Guide
Last updated
RAPT Can & Bottle Filler | Operation Guide
Last updated
When not in use disconnect the RAPT Can and Bottle Filler from the gas supply to prevent the risk of gas leaking to atmosphere
When not in use disconnect the power supply, clean the liquid and gas tubes out thoroughly to prevent mould
Only use 24V power supply that comes with the unit. DO NOT attempt to use other power supplies that are rated to a different voltage
To get the most out of this device we recommend that you connect the device to your Wi-Fi network and connect your device to your app.rapt.io account on the web portal.
This has two major advantages:
The device can download the latest firmware version
Your filling profile and usage of the machine are synced with the web portal
To Connect and Register your RAPT Can & Bottle Filler please refer to Getting Started
The RAPT Can & Bottle FIller has Fill Presets stored already.
Access the Fill Presets through the on screen menu and select the Preset that is best suited to the vessel you are filling.
When you first get the RAPT Can and Bottle Filler you can adjust the presets so they are perfect for your particular application.
Once you are happy with the preset then click on the “start button” (the one with the green LED light) and the filling process will start.
If you want to make a small adjustment to the fill level “on the fly” you can use the up and down buttons on the display to either increase or decrease the “offset”. This figure will not permanently save in that preset so if you find that a preset is consistently off (either fills too much or fills too little) then it’s best to go into the preset setting and permanently save a new figure there.
The RAPT Can & Bottle Filler determines the fill level using the pressure inside the gas purge tube. This pressure calculation is then used to determine the exact height of the liquid inside the vessel that is being filled.
