Get Started!

RAPT Temperature Controller - getting started!

Ensure you have updated the firmware on your device before attempting to register

Connect your RAPT Temperature Controller to your WiFi network

• Plug your RAPT Temperature Controller into power using the supplied power cable.

• On your smart phone or tablet, open your WiFi settings and connect to the Kegland RAPT WiFi network using the WiFi name and password displayed on the RAPT Temperature Controller.

• Once your smart phone or device is connected to the RAPT Temperature Controller network, the Captive WiFi Portal will open automatically.

• Select your WiFi network from the list of available networks, and enter the WiFi password for your network then select Join. This will connect your RAPT Temperature Controller to your WiFi network.

• If your RAPT Temperature Controller has been successfully connected to your WiFi network then a WiFi symbol will be present on the top right-hand corner of the RAPT Fermentation Chamber display.

Register your RAPT Temperature Controller to your Account on the RAPT Cloud

• Once your RAPT Temperature Controller is connected to your Wi-Fi network enter the menu by pressing Select on the controller. Select Settings and scoll down to Check For OTA Update. Select this. The RAPT Temperature Controller will check for new firmware updates and automatically install any available updates.

• Once the firmware is updated, enter the menu by pressing Select on the controller. Select Register Device from the menu.

• A Mac Address and Validation Code will then be displayed on the device. Write both of these down. You will need to enter the MAC address and Validation Code on the RAPT Portal to register your device.

• Log in to the RAPT Portal (https://app.rapt.io/) on a device that is connected to the same Wi-Fi network as the RAPT Temperature Controller you are registering.

• In the RAPT Portal select Register Device. Select Temperature Controller from the drop down. Select Next after ensuring that your RAPT Temperature Controller is connected to your WiFi network as above.

• Enter the MAC address (this will default to All Caps - that is normal) and Validation Code when prompted in the required fields, then select Next.

• You will be prompted to enter a name for your RAPT Temperature Controller . This is to identify the device in the RAPT Portal, and does not have any functional effect. Input the desired name and select Finish.

• Congratulations! Your RAPT Temperature Controller is connected to WiFi and registered to your RAPT Portal and can now be controlled through the RAPT Portal.