Get Started!

RAPT Gen 4 BrewZilla | getting started!

Ensure you have updated the firmware on your device before attempting to register

Connect your BrewZilla to your WiFi network

• Plug your BrewZilla Gen 4 into power using the supplied power cable.

• Plug your BrewZilla Controller into the boiler using the provided 8-pin power cable.

• On your smart phone or tablet, open your Wi-Fi settings and connect to the Kegland RAPT XXX network using the Wi-Fi name and password displayed on the BrewZilla controller.

• Once your smart phone or device is connected to the BrewZilla network, the Captive WiFi Portal will open automatically.

• Select your WiFi network from the list of available networks, and enter the WiFi password for your network then select Join. This will connect your BrewZilla controller to your WiFi network.

• If your BrewZilla has been successfully connected to your WiFi network then a WiFi symbol will be present on the top left-hand corner of the BrewZilla display.

Register your BrewZilla to your Account on the RAPT Portal

• Once your BrewZilla controller is connected to your Wi-Fi network enter the menu by pressing Select on the controller. Select Settings and scoll down to Check For OTA Update. Select this. The BrewZilla will check for new firmware updates and automatically install any available updates.

• Once the firmware is updated, enter the menu by pressing Select on the controller. Select the button from the menu.

• A Mac Address and Validation Code will be displayed on the device. Write both of these down. You will need to enter the MAC address and Validation Code on the RAPT Portal to register your device.

• Log in to the RAPT Portal (https://app.rapt.io/) on a device that is connected to the same Wi-Fi network as the BrewZilla you are registering.

• In the RAPT Portal select Register Device. Select BrewZilla from the drop down. Select Next after ensuring that your BrewZilla Controller is connected to your WiFi network as above.

• Enter the MAC address (this will default to All Caps - that is normal) and Validation Code when prompted in the required fields, then select Next.

• You will be prompted to enter a name for your BrewZilla. This is to identify the device in the RAPT Portal, and does not have any functional effect. Input the desired name and select Finish

• Congratulations! Your BrewZilla is connected to WiFi and registered to your RAPT Portal and your BrewZilla can now be controlled through the RAPT Portal.